Hardwood
Engineered hardwood
Luxury vinyl plank
Laminate
Porcelain tile
Carpet
Shaw
Mohawk
COREtec
PergoFree in-home measure and written estimate: Shaw, Mohawk, COREtec and Pergo lines compared on your own rooms, with carpet, tile, vinyl plank, laminate and hardwood laid out side by side
Get your free estimateTrusted Hardwood Floor Refinishing for Paradise Homeowners
Scratches, gray traffic lanes, and a dull finish that no amount of mopping brings back are the usual reasons people in Paradise start thinking about refinishing instead of replacement. A good refinish takes a worn wood floor back to bare wood and rebuilds the finish in a controlled sequence of sanding, staining, and sealing, which usually costs far less than tearing it out and preserves the original character of the boards. Our technicians have up to 11 years of experience on wood floors, and we bring the equipment and patience the job demands. Call (844) 651-6528 to schedule a free estimate.
What Our Hardwood Floor Refinishing Service Includes
Refinishing covers six related jobs, and which one you need depends on the condition of the wood. Here’s how we handle each.
Hardwood Floor Sanding
Sanding removes the old finish and the top layer of worn wood to expose fresh grain, and it’s the step that determines how the finished floor looks. You need it when the old finish has worn through in places, when the boards have cupped or show deep scratches, or when a previous coat went on unevenly. We sand in stages, working down through finer grits, then vacuum and wipe the floor to remove dust before anything else goes on it.

Hardwood Floor Staining
Stain changes the color of the wood, so it’s the step where a floor goes from plain to a room’s defining feature. Homeowners ask for it when the original color has faded unevenly or when they want the wood to match a new palette across the house. We apply stain evenly across the whole floor, work with the grain, and wipe it back to control depth, then seal it. Stain takes differently on different species and on older wood, so we check how yours responds before committing to a color.

Hardwood Floor Restoration
Restoration is for floors with real damage: gaps between boards, water marks, pet stains, or sections that have been patched over the years. It combines sanding with targeted repair, replacing or re-fitting individual boards so the finished floor reads as one continuous surface. You need it when a simple sand and coat won’t hide the wear. We assess the wood thickness and condition at the estimate before promising a restore is possible.

Hardwood Floor Buffing
Buffing is a light abrasion of the existing finish, not the wood, followed by a fresh coat. It’s the right call when the finish is hazy or scuffed at the surface but the wood underneath is still sound. We buff the floor to give the new coat something to grip, then apply it for a cleaner, brighter look without the cost of a full sand.
Screen and Recoat Hardwood Floors
A screen and recoat is a step up from buffing: the surface is scuffed with a screen and a new topcoat goes on, without stripping back to bare wood. It suits floors where the finish is intact but tired, and it refreshes the sheen while adding a layer of protection. We check that the existing finish is compatible before recoating so the new layer bonds properly.
Stair Refinishing
Stairs take a beating, especially the treads at the center path everyone uses. Refinishing them means sanding back the treads and risers, matching them to the floor finish, and dealing with the tight corners and edges a flat floor machine can’t reach. We hand-work the detail areas so the stairs hold up and sit visually right with the floor below them.
Styles & brands we work with
- Hardwood
- Engineered hardwood
- Luxury vinyl plank
- Laminate
- Porcelain tile
- Carpet
- Shaw
- Mohawk
- COREtec
- Pergo
Brands We Service for Hardwood Floor Refinishing
We work with wood floors regardless of who supplied the original boards, and our nine-brand portfolio means we also handle the surrounding surfaces. Flooring from Shaw and Armstrong turns up often in Paradise homes, and we know where those boards tend to wear and how their finishes respond to sanding and recoating. If your whole-home project also touches tile, working in Daltile material or Karndean flooring alongside the refinish means one company handles both surfaces instead of two.
Whether your wood floor is Shaw or Armstrong, or just an older floor with an unknown label, we can help. We assess the condition at the estimate, tell you honestly whether refinishing is the right move, and set the schedule from there.
Signs You Need Hardwood Floor Refinishing Right Now
- Worn finish paths. Traffic lanes that have gone gray or dull are the finish wearing away, exposing wood to moisture and grit. Left alone, the wear reaches the wood itself and turns a buff into a full sand.
- Deep scratches and gouges. Scratches you can feel with a fingernail usually mean the wood surface needs attention, not just a coat. Refinishing levels the surface so the repair doesn’t show under a new finish.
- Cupping or boards lifting at the edges. Boards that curl at the edges signal a moisture issue that needs sorting before any finish goes on. We identify the source first so the refinish holds.
- Water marks and pet stains. Dark rings and stains can sit deep in the wood, and whether they sand out depends on thickness and condition. An estimate visit gives a straight answer rather than a guess.
- A dated color you want gone. Old orange-toned stain can date an entire room, and restaining is a cost-effective way to change it without new boards. Nobody needs to replace a sound floor to update the color.
Our Hardwood Floor Refinishing Process – Step by Step
- 1
Estimate and wood assessment. We walk the floor, check the thickness of the wear layer, look at gaps and stains, and test how the existing finish responds. This is where we say honestly whether a full refinish, a screen and recoat, or a patch is the right path.
- 2
Preparation and repair. Loose boards get fixed, nail heads set, and gaps addressed before sanding. Dust is contained with the right equipment so the rest of the home stays livable.
- 3
Sanding in stages. We work through progressively finer grits to remove the old finish and smooth the wood, vacuuming and wiping between stages. This is the part that determines whether the finish reads flat and even or blotchy.
- 4
Staining and sealing. Stain goes on evenly, worked with the grain and wiped back to the depth you asked for, then sealed and left to cure per the product instructions. The written estimate sets the product and the schedule.
- 5
Final walkthrough. We inspect the finished floor with you, check the edges and stairs, and confirm the room is ready to be moved back into.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Hardwood Floor Refinishing Cost in Paradise?
A typical hardwood floor refinishing project in Paradise runs $1800 – $5000, which covers a 500 to 800 square foot area with materials and labor. That range assumes no major repairs and a floor in refinishable condition. If the wood needs boards replaced or a stain deep enough to require extra sanding passes, the price moves toward the upper end or beyond, depending on what the estimate finds.
For a smaller scope, refinishing starts at about $3 per square foot, and the final rate depends on the product, the room, and the subfloor. A buff or screen and recoat on a floor with a sound finish costs less than a full sand and stain because less material comes off. Stair refinishing is priced per job and adds to the total for most whole-floor projects.
| Service | Typical Estimated Range |
|---|---|
| Full hardwood refinishing (500 – 800 sq ft) | $1800 – $5000 |
| Refinishing starting per square foot | from about $3 |
| Stair refinishing | priced per job with the floor |
What affects price: floor size, wood condition, stain complexity, the number of stairs, and how much furniture or trim has to be moved. Avoid overpaying by getting a written estimate that names the scope and the products. Every estimate from us is free, itemized, and no-obligation, and the written estimate sets the final price.
Hardwood Floor Refinishing Near Paradise – Our Service Area
We work across the Paradise area and nearby communities including Enterprise, Henderson, Spring Valley, and Winchester. If you’re scheduling a refinish, call for a free estimate and we’ll book a visit. We answer 24/7 for phone calls, and fast dispatch runs 7am to 7pm, Sunday through Friday.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Hardwood Floor Refinishing in Paradise
Hardwood floor refinishing is the process of sanding away the worn finish and the top layer of wood, then applying new stain and seal to restore the floor. It brings back color and sheen without replacing the boards. We recommend it when the wood is thick enough and structurally sound, confirmed at the estimate.
Most refinishing jobs take several days between sanding, staining, and curing, and the exact schedule is set at the estimate. The condition of the wood and the products specified on your written quote determine the timing. We’ll give you a realistic window before you commit.
Typical hardwood refinishing in Paradise runs $1800 – $5000 for a 500 to 800 square foot area with materials and labor. Refinishing starts at about $3 per square foot, and final pricing depends on the wood condition, stain choice, and stairs. Call (844) 651-6528 for an exact quote, estimates are free.
Yes. We service Shaw and Armstrong wood floors as part of our refinishing work, along with other brands. If you’re not sure of the brand, we can still assess the floor and recommend the right approach. Call for a free estimate.
We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. We’re closed on Saturday. A call outside dispatch hours is booked into the next opening.
Warranty terms depend on the product and the job, so we can’t quote one here. Your written estimate names the scope and any applicable terms. Ask about it at the estimate and we’ll spell out what applies to your floor.
Clear the room of furniture and breakables before the crew arrives. Remove wall hangings and cover anything that can’t move. We handle the rest, and we’ll confirm what to expect in the scheduling conversation.
Schedule Your Hardwood Floor Refinishing Service in Paradise Today
A refinish is a booked job: free in-home measure and estimate first, written price second, then a scheduled install day. Paradise Flooring Installation handles refinishing alongside carpet installation and tile work so one company covers every surface. Call (844) 651-6528. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free and no-obligation.
Written by the team at Paradise Flooring Installation.